How to Reset the Exhaust Fluid System Fault on a Ford Diesel Truck: A Complete Guide

6 min read

If you've ever seen the warning light for the exhaust fluid system pop up on your Ford diesel truck, you know how nerve-wracking it can be. Don’t worry—resetting this fault is often straightforward, and I’m here to guide you through every step with clarity and confidence. This comprehensive guide aims to provide you with detailed, accurate information to troubleshoot and reset the exhaust fluid system fault effectively.

In this article, we will explore what causes exhaust fluid system faults in Ford diesel trucks, how to properly reset the fault when it occurs, and tips to prevent future issues. Whether you're a seasoned truck owner or a new enthusiast, understanding these vital steps can save you time and avoid unnecessary visits to the mechanic. Rest assured, I will walk you through each detail to ensure you're well-equipped to handle this common but manageable problem.

By reading on, you'll discover detailed troubleshooting techniques, real-world tips, common mistakes to avoid, and insights into maintaining your truck’s exhaust system to keep it running smoothly. Let's dive into everything you need to know about resetting that fault and keeping your Ford diesel truck in top shape.


Understanding the Exhaust Fluid System on Ford Diesel Trucks

The exhaust fluid system is central to your Ford diesel truck’s emissions control—specifically, the Selective Catalytic Reduction (SCR) system, which reduces harmful emissions. When there’s an issue, the truck’s onboard diagnostics system (OBD) triggers a fault warning to prevent damage and ensure safety.

Key Terms and Definitions:

  • DEF (Diesel Exhaust Fluid): A solution of urea and water used to reduce nitrogen oxide emissions.
  • SCR System: A system that treats exhaust gases using DEF to minimize pollutants.
  • DPF (Diesel Particulate Filter): Filters soot and particulates from the exhaust.
  • OBD (On-Board Diagnostics): Your truck's computer system that monitors engine and emission systems.
  • Fault Code: Specific codes generated by the OBD system indicating issues like DEF faults.

Why Faults Occur:

  • Low DEF levels
  • DEF quality issues (contaminated or old fluid)
  • Exhaust system sensor malfunction
  • Blockages or leaks in the SCR system
  • Aftermarket modifications affecting emissions

How to Reset the Exhaust Fluid System Fault on Your Ford Diesel Truck

Step 1: Ensure Safety and Basic Checks

Before diving into resets, make sure your truck is on a flat surface, the engine is turned off, and the parking brake is set. Check DEF levels; if they are low, fill with high-quality DEF as per manufacturer specifications.

Quick checklist:

  • Verify DEF tank is full
  • Check for visible leaks or damage
  • Confirm all sensor connections are secure
  • Clear the area of any obstructions

Step 2: Read and Record Fault Codes

Use an OBD-II scanner to read the fault codes stored in your truck's computer. This step is crucial because some faults require specific attention:

  • Plug in your scanner
  • Turn on the ignition (without starting the engine)
  • Follow your tool's instructions to scan for codes
  • Write down any codes related to DEF or exhaust system faults

Common fault codes include:

Fault CodeDescriptionPossible Cause
P20EESCR NOx Catalyst Efficiency Below ThresholdSensor malfunction, SCR damage
P206BExhaust Fluid Sensor Circuit HighWiring issue, faulty sensor
P20E8Reductant Quality Control Module (RQSM)DEF contamination or sensor fault

Step 3: Address Mechanical or Sensor Issues

If fault codes indicate sensor faults, leaks, or low DEF, fix those first before attempting a reset. This may involve:

  • Replacing faulty sensors
  • Fixing leaks or clogs in the SCR system
  • Ensuring DEF quality (use only manufacturer-approved fluid)

Step 4: Performing the Reset

Once the mechanical issues are addressed and DEF levels are adequate, reset the fault codes:

  • Use the OBD-II scanner to clear the fault codes
  • For some Ford models, a scan tool with special capabilities may be needed to reset the exhaust system specifically
  • Alternatively, disconnect the truck’s battery for about 10-15 minutes to reset the system

Note: On modern Ford trucks, the system might require a drive cycle for the faults to clear completely. This involves driving at a steady speed for specific periods to allow the system to self-diagnose and reset.


Tips for Success in Resetting Your Exhaust Fluid Fault

TipExplanation
Use Quality ToolsAlways employ a reliable OBD-II scanner with Ford-specific functions.
Follow Drive CyclesPerform the recommended driving pattern post-reset to ensure fault codes clear.
Wait for System ReadinessBe patient; some faults won’t clear until the system confirms normal operation.
Maintain DEF LevelsRegularly top up with high-quality DEF to prevent recurring faults.
Keep Sensors CleanRegularly inspect and clean exhaust sensors if accessible.

Common Mistakes and How to Avoid Them

  • Ignoring Low DEF Levels: Always keep DEF topped up; low levels can cause false fault indications.
  • Using Poor-Quality DEF: Cheap or contaminated DEF can cause sensor errors. Use only reputable brands.
  • Neglecting Mechanical Repairs: Resetting faults won’t fix underlying mechanical issues—address sensor and SCR system problems first.
  • Driving Improperly Post-Reset: Failing to complete the required drive cycle may prevent fault code clearing.

Variations and Additional Considerations

While the outlined process works for most Ford diesel trucks, some models, especially newer ones, may have manufacturer-specific reset procedures. These might involve:

  • Using dedicated Ford diagnostic tools like FORScan or dealership-level software
  • Performing specific calibration or software updates after repair

Always check your vehicle’s service manual or consult a qualified technician if in doubt.


Why the Exhaust Fluid System and Its Maintenance Matter

Your truck’s SCR system isn’t just about emissions—it also affects engine performance, fuel efficiency, and compliance with environmental standards. Ignoring faults can lead to severe engine restrictions, costly repairs, or even illegal emissions violations. Regular maintenance, including timely DEF refills and sensor checks, is essential for smooth operation.

Properly resetting fault codes ensures your truck runs optimally and prevents unnecessary breakdowns. It also contributes to your vehicle’s longevity and eco-friendliness—so pay attention to these systems.


Final Thoughts

Resetting the exhaust fluid system fault on a Ford diesel truck might seem complicated at first, but with the right tools and knowledge, it’s manageable. Always address underlying mechanical issues first, and follow the proper reset procedures. Remember, consistent maintenance and timely diagnostics will keep your truck running clean and efficient for years to come.

If you’re unsure or face persistent issues, don’t hesitate to visit a qualified mechanic familiar with Ford diesel systems. Proper care ensures your vehicle stays on the road and emissions stay in check.


Stay proactive, maintain your DEF levels, and keep your diesel truck performing at its best!

Comments

No comments yet. Be first.

More from this author